跳到这一步
由 Tucker Harmon — 编辑
编辑已通过 由 Tucker Harmon
- 之前
- 之后
- 不变
步骤行
| + | [* black] Now apply gentle pressure on the left half of the plate until one hears it click in place. |
|---|---|
| + | [* black] Ensure that the plate is level with the rest of the bottom of the Laptop. |
| + | [* black] Look into the two screw holes and make sure one can NOT see a screw head. If one does see a screw head where one is supposed to be, go back to steps 3 and 4 and readjust the screws such that they are in the correct holes. |
图片1
没有之前的图片
已添加