跳到步骤＃4
步骤行
| [title] Lift and remove the rear panel | |
| - | [* icon_caution] When lifting the panel, make sure not to lift it too high, since you'll run the risk of tearing the cable, or damaging the connector on the board |
| + | [* icon_caution] When lifting the panel, make sure not to lift it too high, since you'll run the risk of tearing the cable, or damaging the connector on the board. |
| [* blue] Flip the lock on the flex cable connector up with a spudger. | |
| [* black] The front panel should pop off now that the cable has been disconnected. | |
| [* icon_note] When reassembling the device, make sure to insert the left side of the front panel first, since it has a small lip that needs to fit under the left part of the camera case. |