跳到步骤＃4
步骤行
| + | [title] Lift and remove the rear panel |
|---|---|
| + | [* icon_caution] When lifting the panel, make sure not to lift it too high, since you'll run the risk of tearing the cable, or damaging the connector on the board |
| + | [* blue] Flip the lock on the flex cable connector up with a spudger. |
| + | [* black] The front panel should pop off now that the cable has been disconnected. |
| + | [* icon_note] When reassembling the device, make sure to insert the left side of the front panel first, since it has a small lip that needs to fit under the left part of the camera case. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加