跳到步骤＃6
由 Walter Galan — 编辑
编辑已通过 由 Walter Galan
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Remove the following screws from the headphone jack assembly: |
| + | [* red] Five 2.6 mm Phillips #0 |
| + | [* orange] Two 2.0 mm Wide Head Phillips #00 |
| + | [* yellow] Two 2.6 mm Phillips #00 |
| + | [* icon_note] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw. |