跳到步骤＃3
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* red] Move the ribbons out of the way and remove the eight |
|---|---|
| + | [* red] Move the ribbons out of the way, and remove the eight 10mm screws in the middle that hold the circuit board down. |
| [* orange] Remove the two 12mm screws in the corner of the circuit board. |