跳到步骤＃5
步骤行
| + | [* red] Locate the Ribbon Cable. |
|---|---|
| + | [* black] Using Reverse Tweezers, tuck under the blue plastic piece. |
| + | [* black] Pull the blue piece and pull outwards. Pulling outwards should disconnect the ribbon from the circuit. |
| + | [* icon_caution] Must be gentle, but forceful enough. The ribbon can rip if to much force is used. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加