跳到步骤＃1
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* black] Now that you have removed the flash assembly, it is time to remove the motherboard. |
|---|---|
| [* black] First, the three remaining ribbon connectors should be gently disconnected. They are both located on the upper right side of the motherboard. | |
| [* black] The foam on second ribbon connector must be pulled back to remove it. Do this gently as to not damage the connector or the foam. There is a small switch under the foam that must be flipped up before the connector can be removed. |