跳到步骤＃1
由 Matthew Krahl — 编辑
编辑已通过 由 Matthew Krahl
- 之前
- 之后
- 不变
步骤行
| + | [* black] Before removing or touching the PCB board, the Capacitor needs to be checked for voltage. This device is the black cylinder on the camera. Place a voltmeter in parallel with the capacitor. If a charge is detected, make sure battery is removed from the device. Then switch the setting of the multi meter to ADC for direct current amperage. . |
|---|
图片1
没有之前的图片
已添加