跳到步骤＃2
由 Colin Tourjee — 编辑
编辑已通过 由 Colin Tourjee
- 之前
- 之后
- 不变
步骤行
| - | [* red] Locate the three multicolored wire connectors which connect the circuit board to other printer components. |
|---|---|
| + | [* red] Locate and remove the three multicolored wire connectors which connect the circuit board to other printer components. |
| [* icon_note] Remove each connector using tweezers if it is too difficult to remove them by hand. |