跳到步骤＃3
由 Colin Tourjee — 编辑
编辑已通过 由 Colin Tourjee
- 之前
- 之后
- 不变
步骤行
| [* black] Locate the three screws which hold the circuit board in place. | |
| - | [* black] Remove each [size] screw using a screwdriver with the T10 torx bit. |
| + | [* black] Remove the top two 13mm screws using a screwdriver with the T10 torx bit. |
| + | [* black] Remove the bottom 9mm screw using a screwdriver with the T10 torx bit. |
| [* black] Replace the circuit board with a new one. |