跳到步骤＃1
由 Dominik Schnabelrauch — 编辑
编辑已通过 由 Dominik Schnabelrauch
- 之前
- 之后
- 不变
步骤行
| + | [* red] Remove the two #000 Phillips screws. |
|---|---|
| + | [* black] Disconnect the loudspeaker flex connecetor with a spudger. |
| + | [* black] Use the pointy end of a spudger to pry out the daughterboard. |
| + | [* icon_caution] There are some small electronic parts on the bottom of the daughterboard. Don't damage them whilst removing it. A save prying point is e.g. next to the red rubber gasket. |
| + | [* black] Remove the daughterboard. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加