跳到步骤＃3
由 Andrew Optimus Goldheart — 编辑
编辑已通过 由 Andrew Optimus Goldheart
- 之前
- 之后
- 不变
步骤行
| + | [* black] Use the edge of a plastic opening tool to flip up the retainer securing the control board cable connector to its socket on the logic board. |
|---|---|
| + | [* black] Pull the connector away from its socket on the logic board. |
| + | [* icon_caution] Do not lift the cable upward as you disconnect it. |