跳到步骤＃1
由 Brett Hartt — 编辑
编辑已通过 由 Brett Hartt
- 之前
- 之后
- 不变
步骤行
| - | [* black] If present, |
|---|---|
| + | [* black] If present, remove the piece of tape covering the end of the dock connector cable. |
| [* black] Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board. | |
| [* black] Peel the dock connector ribbon cable off the rear panel. |