跳到步骤＃1
由 Jack Hinkle — 编辑
编辑已通过 由 Jack Hinkle
- 之前
- 之后
- 不变
步骤行
| - | [* red] Pry the battery out of the side closest to the charging coil as shown in the photo by the red circle. |
|---|---|
| - | [* icon_caution] Do not use metal tools do to the fact that it could injury you. |
| + | [* red] Use a plastic spudger to pry the battery up at an angle, partially removing it from the internal frame. |
| + | [* icon_note] This won't completely remove the battery, as it is still soldered to the mainboard. |
| + | [* icon_caution] Do not use a metal pry tool to complete this step. You may puncture the battery pack, possibly leading to leakage, fire, or explosion. |