跳到步骤＃2
由 Muana Kasongo — 编辑
编辑已通过 由 Muana Kasongo
- 之前
- 之后
- 不变
步骤行
| - | [* black] The white cable is the heating coil |
|---|---|
| + | [* black] The white cable is the heating coil. It is powered through the board by the power switch. It has three small wires that are soldered on the board. |
| [* black] Unsolder the three wires as shown on the picture. Mark the location of each wire. | |
| + | [* black] Refer to Hot Tools Professional 1110 Power Switch Replacement for more guidelines. |