跳到步骤＃7
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* black] Rotate the handle, and remove the screw that holds on the spring mechanism for the clamp. This screw is a 8mm Phillips #2 Pan Head |
|---|---|
| - | [* black] Once this step is fished your Hot Tools Professional 1110 will be fully disassembled and ready to have |
| + | [* black] Rotate the handle, and remove the screw that holds on the spring mechanism for the clamp. This screw is a 8mm Phillips #2 Pan Head. |
| + | [* black] Once this step is fished your Hot Tools Professional 1110 will be fully disassembled and ready to have its components replaced. |