跳到步骤＃1
由 Nneoma Maxine Ugwu — 编辑
编辑已通过 由 Nneoma Maxine Ugwu
- 之前
- 之后
- 不变
步骤行
| - | [* red] Using a Philips |
|---|---|
| + | [* red] Using a Philips 0 screw driver, unscrew the two 8mm screws from the panel. |
| [* black] Take a spudger and wedge it between the panel and the base of the device. | |
| [* black] Push down on the spudger until you hear a click sound. | |
| [* black] Slide the spudger along the panel and continue to push down until the panel is completely detached. | |
| [* black] Remove the panel |