介绍历史： GI Node with Pressure Transducer Assembly
由 Charlotte Pratt — 编辑
编辑已通过 由 Charlotte Pratt
- 之前
- 之后
- 不变
| 设备 |
|
|
| Type |
|
|
| Title |
|
|
| Time Required Min |
没有估计
|
|
| Time Required Max |
没有估计
|
|
| Imageid |
之前
之后
|
|
| Difficulty |
Moderate
|
|
| Conclusion |
|
|
| Author | ||
| Public |
否
|
配件
- Enclosure x1 added.
- Steel Plate x1 added.
- Enclosure-to-steel plate screws x4 added.
- Enclosure-to-steel plate nuts x4 added.
- Solar Panel x1 added.
- Cable Glands(for solar wire) x1 added.
- Lock x1 added.
- Microcontroller x1 added.
- Jumpers x1 added.
- Enclosure-to-board screws x4 added.
- Cell Module x1 added.
- Antenna x1 added.
- GPS Unit x1 added.
- Velcro x1 added.
- 3.7 V Li-ion Battery x1 added.
- 4-Wire Terminal Block Plug 2.54 mm x1 added.
- 5-Wire Terminal Block Plug 3.5 mm x1 added.
- 2-Wire Terminal Block Plug 3.5 mm x1 added.
- 150 Ω 1% resistor x1 added.
- 12 V Step-up voltage regulator x1 added.
- Soil Moisture Sensor x1 added.
- Pressure Transducer x1 added.
- Transducer 15ft cable/ sensor x1 added.
- Hydrophobic Vent Cap x1 added.
- Thick-Wall Unthreaded PVC Water Pipe( 5ft l, 2 in w) x1 added.
- Thick-Wall Unthreaded PVC Water Pipe (5ft l, 1.5in w) x1 added.
- Cut-to-Size Suction Strainer with Backflow-Prevention Valve x1 added.
- Rigid PVC Conduit 1-1/2 Trade Size Female x 1-1/2 NPSM Male Adapter x1 added.
- Thick-Wall PVC Pipe Fitting Bushing Adapter, 1-1/2 Socket Male x 1-1/4 NPT Female x1 added.
- Steel Locknut x1 added.
- O-Ring x1 added.
标志
- In Progress added.
- Community-Contributed Guide added.
步骤
步骤 1
之前
之后
