|
Introduction |
| Use this guide to remove and replace the PCB flashboard from your Canon EOS Rebel T6i camera. The PCB flashboard should be replaced following damage or exposure to the capacitor and/or the circuit itself. This is a step-by-step guide and each step should be followed in chronological order to ensure desired results. | | | You will need an iFixit opening tool, a spudger, a JIS #000 screwdriver, needle-nosed tweezers, a grounding strap, and a digital multimeter to complete the removal process. | | | Take caution when unassembling your Canon EOS Rebel T6i device. There is potential for device damage during the unassembling process. | | | ***CAUTION(Electric Shock):*** Be careful not to touch the terminals of the capacitor (black cylinder). This can cause the capacitor to discharge. |
|