VTech InnoTab 2 Headphone Jack Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

Tired of sound not working with headphones plugged into your VTech InnoTab 2. Then follow our quick guide to walk you through replacing a headphone jack on your VTech InnoTab 2.

Please note that this guide requires soldering. For more information on how to solder and desolder connections, please visit this guide.

你所需要的

1. 步骤 1 Battery
  Apply slight pressure and slide the button above the battery cabinet to the right to open.
  
  Remove battery cabinet cover by sliding away from the center of device.
  
  This device requires 4AA batteries to function without the AC adaptor.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 2 Back Panel
  Remove all nine plastic caps from the back of the device using the plastic opening tool.
  
  These covers are made of hard plastic so they may be difficult to remove.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 3
  Remove the hard rubber tab located by the cartridge slot using the plastic opening tool.
  
  Be careful not to apply excessive force.
  
  Once the rubber tab is removed unscrew the single 7 mm screw using a J0 screwdriver.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 4
  Remove all ten 7mm screws from the back panel of the device using a JO bit screwdriver.
  
  Do not use excessive force while removing the screws to prevent damaging the plastic case.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 5
  Using the plastic opening tool, detach the back plate from the front piece.
  
  Do not use excessive force. If the back plate does not gently come on double check that all screws were removed.
  
  Once the back panel is removed, you will be able to see the motherboard and other components within the device.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 6 Headphone Jack
  Remove the two 7 mm screws from the left bumper of the device using a JO screwdriver.
  
  Be careful not to pull to hard when removing the bumper to avoid damage to the circuit.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 7
  Use your fingers to gently remove the headphone jack.
  
  De-solder the points shown to fully remove the headphone jack from the motherboard.
  
  A soldering guide offered by IFIXIT can be found here Soldering Skills
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024

结论

To reassemble your device, follow these instructions in reverse order.

取消：我没有完成这个指南。

作者

与1其他贡献者

Roberto Valdes

于10/18/17注册

302 声望

创作了3篇指南

+ 4更多徽章

团队

USF Tampa, Team S1-G85, Cagle Fall 2017 USF Tampa, Team S1-G85, Cagle Fall 2017 的会员

USFT-CAGLE-F17S1G85

2 名成员

创作了10篇指南

0指南评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 17

总计 516