修复你的物品 社区 商店

VTech CS6719-2 Speaker Replacement

简介

During this guide, the back of the phone will need to be taken off to access the speaker and wires. You will need to use the tweezers to remove the metal “U” shaped clip holding the speaker to the back cover.

你所需要的

  1. VTech CS6719-2 Speaker Replacement, Battery: 步骤 1 中的图像 1，2 VTech CS6719-2 Speaker Replacement, Battery: 步骤 1 中的图像 2，2

    • Push down on the battery cover in the direction of the arrow located on the back of the phone.

    翻译

  2. VTech CS6719-2 Speaker Replacement: 步骤 2 中的图像 1，1

    • Pull the battery cover off of the back of the phone.

    翻译

  3. VTech CS6719-2 Speaker Replacement: 步骤 3 中的图像 1，1

    • Unplug the battery input cable.

    翻译

  4. VTech CS6719-2 Speaker Replacement: 步骤 4 中的图像 1，1

    • Lift the battery out of the back of the phone.

    翻译

  6. VTech CS6719-2 Speaker Replacement, Circuit Board: 步骤 5 中的图像 1，2 VTech CS6719-2 Speaker Replacement, Circuit Board: 步骤 5 中的图像 2，2

    • Remove the two 9mm screws on the back side with a Phillips #0 screwdriver.

    翻译

  7. VTech CS6719-2 Speaker Replacement: 步骤 6 中的图像 1，1

    • Use the plastic opening tool and spudger to pry the back side of the phone off.

    翻译

  8. VTech CS6719-2 Speaker Replacement: 步骤 7 中的图像 1，2 VTech CS6719-2 Speaker Replacement: 步骤 7 中的图像 2，2

    • Remove the two 9mm screws located inside the back cover at the top.

    翻译

  9. VTech CS6719-2 Speaker Replacement, Speaker: 步骤 8 中的图像 1，1

    • Locate the metal shaped U clip holding the speaker on. Pull up and towards the top of the phone with the flat head tweezers.

    • The clip is loose, it could fall out.

    翻译

  10. VTech CS6719-2 Speaker Replacement: 步骤 9 中的图像 1，1

    • Lift speaker out.

    翻译

  11. VTech CS6719-2 Speaker Replacement: 步骤 10 中的图像 1，1

    • Heat up solder joint on the circuit board where the speaker wires are connected.

    翻译

  12. VTech CS6719-2 Speaker Replacement: 步骤 11 中的图像 1，1

    • Refer to How To Solder and Desolder Connections 如何焊接和拆焊

    • Note: Ensure the old solder joint is removed.

    • Caution: Soldering iron and joint will become very ho

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Benjamin Field

于02/08/16注册

270 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

IUPUI, Team 1-4, Baechle Spring 2016 IUPUI, Team 1-4, Baechle Spring 2016 的会员

IUPUI-BAECHLE-S16S1G4

4 名成员

创作了16篇指南

2条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 5

总计 714