Skytex SP728 Screen Replacement

Make sure the device is powered off

Rotate the device so the ports and screws face you

Using a small phillips screwdriver, unscrew both end screws

Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device

Once the case has been loosened, pry the backing off gently with your hands.

Follow the Case Replacement to separate the tablet from its backing

Using a small Phillips screw driver, unscrew all screws connecting circuit board to device

Remove all tape connecting battery and circuit board to front case

Detach all connector strips from the circuit board

Using the plastic opening tool, begin separating the front screen from the display

Once screen has been separated, use tweezers to remove front camera