步骤 1 Watch Band



• Place your thumbs on the ends of the screen.
• Push the watch outward while pulling the band away from the watch.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2 Screen

• Heating the device with a hair dryer may warp the screen or damage the device. It it preferable to use an iOpener for this step.
• For step-by-step instructions on using an iOpener, see the iOpener 指南.
• Use a hair dryer, heat gun, or an iOpener to heat the Gear Fit for 1-2 minutes until it is hot to the touch.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful.
• Gently pry the screen loose using a plastic opening tool.
• If the screen doesn't easily come loose, more heating may be required
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4

在这个步骤中使用的工具：
Tweezers
$4.99
购买
• Using tweezers as a lever, pry the inner assembly out of the external casing.
• This will be harder than removing the screen. Moderate force may be required.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Gently peel the screen assembly up and away from the device using tweezers.
翻译
1条评论
添加一条评论
添加评论
1024
取消 发帖评论

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

<iframe id="dozuki-embed-25512" src="https://zh.ifixit.com/Guide/embed/25512/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-25512"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://zh.ifixit.com/Guide/embed/25512" width="800" height="584" allowfullscreen frameborder="0"></iframe>

预览