Roku Streaming Stick Motherboard Port replacement

最后更新于 May 7, 2024

6 - 20 分钟

中等

简介

There were over 10 million Roku Streaming Sticks sold in 2014 within the United States alone when it was released. This guide will show you how to repair and replace the ports on one of these devices.

As a precaution, this guide will require a soldering iron or gun.

你所需要的

工具

步骤 1 Roku Streaming Stick Motherboard Port

Roku Streaming Stick Motherboard Port replacement, Roku Streaming Stick Motherboard Port: 步骤 1 中的图像 1，1

Grab the blue plastic opening tool to open the Roku Streaming Stick 3500R.

编辑

步骤 2

Place the blue plastic opening tool into one of the cracks on the back of the Roku to pop open the Roku Streaming Stick 3500R. Be careful not to break anything while removing the back.

编辑

步骤 3

Once you have removed the cover, you can now access the motherboard of the Roku Streaming Stick.

编辑

步骤 4

在这个步骤中使用的工具：

Tweezers

$4.99

添加到购物车

Remove the motherboard by grabbing a hold of the micro-usb port, or you can also use tweezers to grab a hold of it and pull it out. But be careful with where you grab the motherboard.

编辑

步骤 5

Roku Streaming Stick Motherboard Port replacement: 步骤 5 中的图像 3，3

Once you identify the HDMI port and the micro-usb port, you can investigate to see which port may be damaged.

编辑

步骤 6

Once you have identified the problem you can then desolder the points at the HDMI as highlighted, or at the micro-usb ports.
If the soldering gun, or iron is set too high you then run the risk of destroying the motherboard altogether, or even damaging the wireless antennas.

编辑