跳转到主内容

简介

]

视频概述

  1. Make sure power is off, and remove the side panel.
    • Make sure power is off, and remove the side panel.

  2. Remove the screws that hold the GPU in on the rear bracket.
    • Remove the screws that hold the GPU in on the rear bracket.

  3. Unlock the PCI-e slot chip.
    • Unlock the PCI-e slot chip.

  4. Remove the GPU by gently pulling on the card.
    • Remove the GPU by gently pulling on the card.

  5. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  6. Hover the new GPU over the PCI-e slot.
    • Hover the new GPU over the PCI-e slot.

  7. Push down on the card to slide the connector into the slot.
    • Push down on the card to slide the connector into the slot.

  8. Ensure that the secure locks click into place.
    • Ensure that the secure locks click into place.

  9. Screw the rear bracket down to secure the card to the chassis.
    • Screw the rear bracket down to secure the card to the chassis.

  10. Reconnect any required GPU cables.
    • Reconnect any required GPU cables.

  11. Reattach the side panel.
    • Reattach the side panel.

结论

To reassemble your device, follow these instructions in reverse order.

Lance Donadel

于2018年04月25日注册

191 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 21

总计 279