跳转到主内容
Razer Blade Stealth 2017 SSD Replacement

Razer Blade Stealth 2017 SSD Replacement

Helene Willits

Helene Willits6 其他贡献者

最后更新于 November 16, 2022

15分钟
中等
特色学生指南

This guide outlines how to replace the SSD on your Razor Blade Stealth if it damaged or non-functional. If the computer presents a blank screen and does not boot up, the SSD may be damaged. If you want to increase the SSD storage on the computer, swap the SSD using this guide. Some iFixit tools are required for this replacement.

你所需要的

修复工具包

本套装包含完成指南所需的所有零件和工具。

配件

工具

  • T5 Torx Screwdriver
    T5 Torx Screwdriver
  • Spudger
    Spudger
  • Phillips #00 Screwdriver
    Phillips #00 Screwdriver

查看更多...

  1. Razer Blade Stealth 2017 SSD Replacement, Battery: 步骤 1 中的图像 1,2 Razer Blade Stealth 2017 SSD Replacement, Battery: 步骤 1 中的图像 2,2
    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

    • Whenever you remove screws from the device, remember to save and label them.

  2. Razer Blade Stealth 2017 SSD Replacement: 步骤 2 中的图像 1,1
    • Remove the bottom cover of the laptop by sliding it away from the hinge.

    • Do not force the cover up!

  3. Razer Blade Stealth 2017 SSD Replacement: 步骤 3 中的图像 1,2 Razer Blade Stealth 2017 SSD Replacement: 步骤 3 中的图像 2,2
    • Use your fingernail to pry up and disconnect the battery from the motherboard.

  4. Razer Blade Stealth 2017 SSD Replacement: 步骤 4 中的图像 1,1
    • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

  5. Razer Blade Stealth 2017 SSD Replacement: 步骤 5 中的图像 1,2 Razer Blade Stealth 2017 SSD Replacement: 步骤 5 中的图像 2,2
    • Remove any tape attached to the battery.

    • Use the plastic spudger to pry out the battery.

  6. Razer Blade Stealth 2017 SSD Replacement, SSD: 步骤 6 中的图像 1,2 Razer Blade Stealth 2017 SSD Replacement, SSD: 步骤 6 中的图像 2,2
    • Use a plastic spudger to disconnect one end of the interconnect cable.

    • Remove any tape attached to the interconnect cable.

  7. Razer Blade Stealth 2017 SSD Replacement: 步骤 7 中的图像 1,1
    • Lift the black plastic cover and interconnect cable to expose the SSD.

    • Use a Phillips #00 to remove the one, 2mm screw on the left side of the SSD.

  8. Razer Blade Stealth 2017 SSD Replacement: 步骤 8 中的图像 1,1
    • Remove the SSD from the motherboard by sliding it out at an angle.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Helene Willits

于10/10/19注册

776 声望

创作了6篇指南

团队

Cal Poly, Team S11-G3, Regan Fall 2019 Cal Poly, Team S11-G3, Regan Fall 2019 的会员

CPSU-REGAN-F19S11G3

4 名成员

创作了7篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 12

过去 30 天: 36

总计 5,128