Philips Sonicare 2 Series Disassembly

Jonathan Jarvis 和 6 其他贡献者

最后更新于 June 2, 2023

20分钟 - 1小时

简单

仅作为前提条件

本指南仅用作其他指南的先决条件。不能单独使用。

简介

转到步骤 1

This is a prerequisite only guide. Make sure your toothbrush is unplugged from the charger before beginning the disassembly. Also use caution while using any metal tools. This is too avoid electric shock. This is guide is used for the disassembly for the Philips Sonicare 2 series toothbrush.

你所需要的

工具

步骤 1 Philips Sonicare 2 Series Disassembly

Philips Sonicare 2 Series Disassembly, Philips Sonicare 2 Series Disassembly: 步骤 1 中的图像 1，1

Pull upwards to remove the brush head from the top of the device.

翻译

步骤 2

Remove the 12 mm T8 Torx screw from the bottom of the toothbrush. After removing the screw, pry off the base with a plastic opening tool.

翻译

步骤 3

Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port.
Be very careful not to damage the charging port during this step. Otherwise you will have to solder this part back to the device as shown in the second figure.

翻译