简介

LCD's can stop working, get cracked or for any number of reasons need to be replaced. This guide shows the relatively easy process for replacing the LCD on this camera. The process involves removing the back panel from the camera and a couple of ribbon cables.

配件

无需配件。

Remove all the screws holding the back plate in place.
  • Remove all the screws holding the back plate in place.

    • Unscrew the 4mm screw that is directly to the right of the viewfinder.

    • On the base:

      • Unscrew 3mm screw in the top left corner

      • Unscrew 4-3mm screws under the battery cover

    • Unscrew 1-3mm screw on the right side panel.

    • Unscrew 2-2mm screws on the left side panel.

    • The bullets on this step apply to all 3 pictures included it this step.

The bullets on this step apply to the 3 pictures included in this step

Cynthia - 回复

Now we remove the back panel completely.
  • Now we remove the back panel completely.

    • 2 ribbon cables can be gently rocked out of their sockets

    • Use metal tweezers to grasp and pull the white cable out of its clip

添加评论

  • Peel the black tape off of the back surface of the LCD

  • Unscrew 4-3mm screws, on the LCD bracket

  • Unscrew 2-2mm screws from the top of the bracket

  • Lastly using a spudger, pop the LCD out of the camera back plate.

  • When the bracket comes off, be aware that the buttons from the top section will fall out of place if the plate is inverted.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Mason Morgan

于2011年04月05日注册

115 信誉积分

创作了6篇指南

团队

Cal Poly, Team 12-33, Maness Spring 2011 Cal Poly, Team 12-33, Maness Spring 2011 的会员

CPSU-MANESS-S11S12G33

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 8

总计 2,527