跳转到主内容

简介

This guide requires a T5 screwdriver for the screws.

配件

没有特定配件。

  1. Start with the phone in the flipped open position.
    • Start with the phone in the flipped open position.

    • You must remove the sticker in the center, below the screen to reveal the center screw.

    • Use a T5 screwdriver to remove all three screws, loosening the front screen.

  2. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  3. Flip the phone to the closed position and turn to the front screen. The front cover will now be loose enough for you to remove by grabbing the edges and lightly pulling the cover off.
    • Flip the phone to the closed position and turn to the front screen.

    • The front cover will now be loose enough for you to remove by grabbing the edges and lightly pulling the cover off.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Cameron Weinberg

于2011年04月12日注册

498 信誉积分

创作了6篇指南

团队

Cal Poly, Team 18-21, Garner Spring 2011 Cal Poly, Team 18-21, Garner Spring 2011 的会员

CPSU-GARNER-S11S18G21

3 名成员

创作了7篇指南

I have a n90 done which will not switch on. I have changed the battery and still nothing.pressing the top power button but nothing.trying to get old pics off the phone any help?

Smith - 回复

Hello Mr Smith. Have you tried to recharge the battery as it is in the phone in question? Recharge the battery while it is in the phone first, IF the phone in question still does not boot up then get another battery from ebay. I have a similar E90 as yours and the battery did go flat in the end, like all batteries, I just got a new battery and then recharged the battery while it is in the phone. Good luck.

Keith N Searle -

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 4,397