跳转到主内容

简介

Installing a new vibration component is necessary when the vibrate mode on your phone is no longer functioning properly. Installation requires no prior knowledge of mobile phone vibrators.

配件

没有特定配件。

  1. Locate the small button on the top of the phone. Depress the button. With your other hand, pull the front cover away from the phone.
    • Locate the small button on the top of the phone.

    • Depress the button.

    • With your other hand, pull the front cover away from the phone.

  2. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  3. Remove all six 5.3 mm long T6 screws. Remove the circuit board/faceplate sub-assembly from the back of the phone. Take care to place screws in a safe location.
    • Remove all six 5.3 mm long T6 screws.

    • Remove the circuit board/faceplate sub-assembly from the back of the phone.

    • Take care to place screws in a safe location.

  4. After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism. Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone. Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.
    • After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism.

    • Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Parker Niebauer

于2012年10月22日注册

1 信誉积分

创作了6篇指南

团队

Clemson, Team 15-3, Benson Fall 2012 Clemson, Team 15-3, Benson Fall 2012 的会员

CLEM-BENSON-F12S15G3

3 名成员

创作了21篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 393