跳转到主内容

简介

This guide will lead you through the steps needed to remove the keypad in your phone.

配件

没有特定配件。

  1. Firmly grip the back of the casing. Separate the front and back casings either by pulling them apart from the middle or gently prying the front off with your fingers from the bottom.
    • Firmly grip the back of the casing.

    • Separate the front and back casings either by pulling them apart from the middle or gently prying the front off with your fingers from the bottom.

    • Be sure not to bend the casing too much when prying from the bottom. Failure to do so may cause it to crack.

  2. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  3. Using the flat end of the spudger, push out the 4 rubber tabs on the back of the keypad to remove it.
    • Using the flat end of the spudger, push out the 4 rubber tabs on the back of the keypad to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

JSwan

于2013年04月12日注册

628 信誉积分

创作了6篇指南

团队

Cal Poly, Team 10-43, Amido Spring 2013 Cal Poly, Team 10-43, Amido Spring 2013 的会员

CPSU-AMIDO-S13S10G43

4 名成员

创作了14篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 6

总计 1,579