Nikon Coolpix B700 Button Assembly Replacement
简介
转到步骤 1This guide shows how to replace the assembly of the shutter button/mode selector dial/buttons. This assembly can be replaced if any of the buttons malfunction or are faulty. The back cove and bracket need to be removed before removing the button assembly.
-
-
Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.
-
-
-
-
Lift the corner under the power button up.
-
While at the same time pushing the selector knob back.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
3等其他人完成本指南。