简介
更换硬盘十分简单！你也可以同时升级更大容量的硬盘，来为电脑扩容。
你所需要的
视频概述
-
-
将电池从Air中取出。
-
充电至100％，然后继续充电至少2小时。然后，拔下并正常使用以排空电池。当您看到低电量警告时，请保存你的工作，并保持笔记本电脑一直打开，直到它因电池电量不足而进入睡眠状态。等待至少5个小时，然后不间断地将笔记本电脑充电至100％。
-
在你安装好你的新电池之后，如果你注意到任何不寻常的举动或是问题，你可能需要重置你MacBook Pro的SMC。
-
-
要重新组装您的设备，请按照本指南的相反顺序进行操作。
要重新组装您的设备，请按照本指南的相反顺序进行操作。
188等其他人完成本指南。
23条评论
It is not necessary to remove the battery. The hard drive can easily be reached while the battery is in place, although you have a little bit more space if you do remove the battery.
It probably is a good idea to unplug the battery before replacing the hard drive, so you do not accidentally short-circuit anything.
My hard drive replacement (a Mach Xtreme Nano PATA ZIF 120GB SSD) actually went in the other way up from the stock Apple Drive. ie The ZIF connector is seen when put back together, rather than under the drive as is the case with the Apple Drive (as seen in Steps 10&11). This also meant the cable came up past the drive on the inside of the bracket then to the mother board. I had tried several times the same way as the Apple drive was, and the cable kept being pulled out of the ZIF connector when putting it back together. Luckily this did not damage my drive.
I cannot tell you how thankful I am for your comment. I bought exactly the same SSD and spent the better part of today trying to get the computer to see it in Disk Utility. I tried everything (at least I thought so!), tweaking the ZIF cable, resetting the rubber bumper, and so on. Must have done ten or more restarts to no avail. The only thing I didn't do was turn the drive upside down! Thank you so much!
SERIOUSLY. 2 hours trying to figure out WHY it wouldn't work, THANK YOU CHARLIE. YEARS LATER.
This guide was very helpful and accurate for our A1304 Air, I have commented/adjusted the guide to give some extra info which I felt was missing, useful for identifying the correct model/revision and related replacement part.
I fitted a RunCore 128GB SSD to our A1304 (Revision B) Air, it was easy enough and works exactly as we hoped! The A1304 (Revision B) model Air has a LIF connector. RunCore have different SSD products for the different Air revisions, it would be easy to order the wrong part, so be sure you you what modle/revision of Air you're working on!
Read the guide in full for, for all the details.
