Skip to main content
  1. Remove the two 8 mm Phillips #0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
    • Remove the two 8 mm Phillips #0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover. DO NOT detach the wire connecting the motherboard to the front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Grasp the white wire connector on the back of the motherboard to remove the USB cable. Wiggle the connector back and forth to remove it from the socket.
    • Grasp the white wire connector on the back of the motherboard to remove the USB cable.

    • Wiggle the connector back and forth to remove it from the socket.

  5. Desolder the joint on the front of the motherboard to completely detach the USB cable. Follow this link to learn how to properly solder and desolder your parts.
    • Desolder the joint on the front of the motherboard to completely detach the USB cable.

    • Follow this link to learn how to properly solder and desolder your parts.

结论

To reassemble your device, follow these instructions in reverse order.

Cory Davis

于2013年04月14日注册

236 Reputation

创作了4篇指南

Team

Cal Poly, Team 12-34, Amido Spring 2013 Cal Poly, Team 12-34, Amido Spring 2013 的会员

CPSU-AMIDO-S13S12G34

4 名成员

创作了8篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 8

All Time: 1,317