简介

This guide will lead you in desoldering the connections between the camera and the motherboard.

  1. Remove the two 8mm Phillips#0 screws on the back cover.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

    添加评论

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the two 8mm Phillips#0 screws on the back of the motherboard.

    添加评论

    • Remove the camera from the motherboard by desoldering the two connections as shown.

    • Follow this link to learn how to properly solder and desolder your parts.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

nieko

于2013年04月18日注册

63 信誉积分

创作了2篇指南

团队

Cal Poly, Team 12-34, Amido Spring 2013 Cal Poly, Team 12-34, Amido Spring 2013 的会员

CPSU-AMIDO-S13S12G34

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 10

总计 1,635