Lenovo IdeaPad U350 RAM Replacement

最后更新于 January 6, 2015

没有估计

中等

简介

RAM, or random access memory, is a form of computer data storage. RAM is used to quickly read and write data which the computer needs rapid access to. If a computer is running very slowly, it may not have enough RAM. In this scenario, the computer reads and writes to 'virtual RAM', also known as 'pagefile', on the hard drive. This is much slower.

你所需要的

工具

Phillips #1 Screwdriver

步骤 1 RAM

Lenovo IdeaPad U350 RAM Replacement, RAM: 步骤 1 中的图像 1，1

Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.
These screws are 4.7mm long with a head diameter of 3.68mm.
The screws are attached to the panel. When unscrewing be sure to stop when you hear a click.

编辑

步骤 2

Gently lift the back panel from the side closest to the battery and remove panel

编辑

步骤 3

Push retention clips outward and then gently slide out of slot

编辑

步骤 4

Remove white and black wires to make room to remove the second RAM module.

编辑

步骤 5

Just like RAM Module 1, push retention clips outward and gently slide out the RAM Module.
When re-installing RAM modules, be sure to insert them at a 45 degree angle. This is the same angle that they should pop up to after the retention clips are pushed outward.

编辑