简介
This guide shows how to remove and replace the back cover for the HP Spectre x360 15t-ap000 laptop.
你所需要的
-
-
Use a T5 driver to remove the following screws securing the back cover:
-
Six 4 mm-long screws
-
Two 7.8 mm-long screws
-
-
-
-
Use an opening tool or your fingers to pry up the back cover from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
另外一个人完成了本指南。