加入维修社区 - 创建账户

简介

If the alarm on your Equity Alarm Clock 13014 is not going off, use this guide to replace the alarm switch.

The alarm switch is a small lever that is flipped, at the set time of the alarm, to activate an internal circuit which in response triggers the alarm to sound. A faulty alarm switch will not activate the internal circuit therefore, never triggering the sound.

Step 5 requires knowledge of basic soldering to detach a wire.

Here is a helpful video on basic soldering: 如何焊接和拆焊

你所需要的

1. 步骤 1 Replacing the alarm switch
  Remove the battery door using your finger nail or an opening tool.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2 Remove screws
  Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 3 Remove Cover
  Remove the back cover gently.
  
  DO NOT pull the back cover off quickly or you may damage the wires connected.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Use a Phillips #1 screwdriver to remove the small screw located above the alarm switch.
  
  Remove the small screw located below the alarm switch as well.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 5
  Place the end of the soldering iron on the end of the wire connected to the copper cylinder to detach the wire.
  
  If you are unfamiliar with soldering, take a look at this article: How to Solder and Desolder Connections.
  
  To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.
  
  Use a Phillips #1 screwdriver to reinstall the switch screws.
  
  Follow steps in reverse order to assemble the clock.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024