简介
If the screen is cracked or damaged it may need to be replaced. This guide will show the user how to easily and safely replace the screen.
你所需要的
-
-
Unscrew the two (2) 1.3mm Phillips #00 screws found on the bottom edge of the tablet, where the power and volume buttons are located.
-
-
-
Insert plastic opening tool into the edge between the screen plate and the back plate to create a separation between the casings.
-
Insert the flat end of the spudger next to the plastic opening tool and carefully pry the edges apart. Continue this all around the edges until the casings separate.
-
-
-
Lift up the two pieces of tape holding the copper plate and the connector ribbon to the battery. Gently hold or place away from the battery.
-
-
在这个步骤中使用的工具:Plastic Cards$2.99
-
Using a plastic card, gently break the adhesive that holds the battery to the metal screen plate.
-
-
-
-
Once the panels are separated, remove the tape holding down the ribbon connector that is connecting the camera to the motherboard.
-
-
-
Once battery is removed, flip up the black lever of the connector that is holding the wide ribbon in place for the screen. Remove the ribbon from the connector.
-
-
-
Once the battery and motherboard have been removed, gently bend the screen plate to pop out the metal digitizer that sits on the glass and plastic screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。