简介

Use this guide to remove the camera lens piece.

配件

无需配件。

  1. Remove wrist strap and battery. Remove wrist strap and battery.
    • Remove wrist strap and battery.

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in). Remove 2 screws from the bottom on the camera (0.138 in). Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Gently pull off the front cover. The plate on the side should come off. Gently pull off the back cover.
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. The cases should now be removed.
    • The cases should now be removed.

  5. Remove the top-left screw above the LCD screen (0.100 in). Remove the C-shaped plate from the side of the LCD screen.
    • Remove the top-left screw above the LCD screen (0.100 in).

    • Remove the C-shaped plate from the side of the LCD screen.

  6. Remove the screw from the top-right of the LCD screen (0.098 in). Remove the L-shaped bar from the right of the LCD screen.
    • Remove the screw from the top-right of the LCD screen (0.098 in).

    • Remove the L-shaped bar from the right of the LCD screen.

  7. Use the spudger to remove the L-shaped bar from the left-side of the LCD screen. Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.
    • Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.

  8. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  9. Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.
    • Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.

    • Be gentle. This ribbon should stay attached to the screen.

  10. Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera. Use the tweezers to lift this ribbon. Use the tweezers to gently peel this ribbon from the one underneath it.
    • Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera.

    • Use the tweezers to lift this ribbon.

    • Use the tweezers to gently peel this ribbon from the one underneath it.

  11. The LCD screen should now be removed.
    • The LCD screen should now be removed.

  12. Remove the screw located on the side of the camera (0.072 in).
    • Remove the screw located on the side of the camera (0.072 in).

  13. Use the spudger to remove the lens ribbon from the circuit board. Use the spudger to lift the ribbon.
    • Use the spudger to remove the lens ribbon from the circuit board.

    • Use the spudger to lift the ribbon.

    • This ribbon is connected to the lens, but the flash assembly ribbon is underneath it.

  14. Disconnect the flash assembly ribbon. The flash assembly ribbon is located underneath the lens assembly ribbon.
    • Disconnect the flash assembly ribbon.

    • The flash assembly ribbon is located underneath the lens assembly ribbon.

  15. Remove the flash assembly, which includes the capacitor. If it resists, note the small hook on the right side near the bottom.
    • Remove the flash assembly, which includes the capacitor. If it resists, note the small hook on the right side near the bottom.

    • Be careful when taking out the capacitor. It could shock you.

  16. The capacitor should now be removed.
    • The capacitor should now be removed.

  17. Remove 4 screws from silver plate (0.106 in).
    • Remove 4 screws from silver plate (0.106 in).

  18. Use spudger to lift the second lens ribbon. Remember the first ribbon was removed while taking out the flash assembly.
    • Use spudger to lift the second lens ribbon.

    • Remember the first ribbon was removed while taking out the flash assembly.

  19. Use spudger to carefully lift the LED light off the upper-left corner of the lens. Use spudger to carefully lift the LED light off the upper-left corner of the lens.
    • Use spudger to carefully lift the LED light off the upper-left corner of the lens.

  20. Remove the lens. Remove the lens.
    • Remove the lens.

  21. The camera lens should now be removed.
    • The camera lens should now be removed.

结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

Tyler Grossheim

于2011年01月25日注册

1,359 信誉积分

创作了6篇指南

团队

Cal Poly, Team 3-32, Regan Winter 2011 Cal Poly, Team 3-32, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G32

3 名成员

创作了8篇指南

How do you CLEAN the lens?

Christian - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 9

过去的30天: 40

总计 17,362