跳转到主内容

简介

The DeWalt D26451's brake function may go bad after heavy usage.

In this guide, we will be teaching you how to replace the brake on the D26451. You can purchase a replacement brake here.

配件

没有特定配件。

  1. Please wear safety glasses while completing this replacement guide. Insert the 60 mm extension into the screw driver which has the t15 torx bit installed in order to make a t-handle grip. Turn the screwdriver counter-clockwise to loosen all three screws in the disc pad.
    • Please wear safety glasses while completing this replacement guide.

    • Insert the 60 mm extension into the screw driver which has the t15 torx bit installed in order to make a t-handle grip.

    • Turn the screwdriver counter-clockwise to loosen all three screws in the disc pad.

  2. Turn the disc pad over and remove the loosened screws. When the screws are removed, the disc pad will come off of the sander.
    • Turn the disc pad over and remove the loosened screws.

    • When the screws are removed, the disc pad will come off of the sander.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Please wear safety glasses while completing this repair guide.
    • Please wear safety glasses while completing this repair guide.

    • Loosen and remove the three screws on the bottom of the sander that holds the disc pad to the bottom of the sander.

  5. After the T20 torx bolts have been removed, remove the disc pad from the sander.
    • After the T20 torx bolts have been removed, remove the disc pad from the sander.

  6. When the disc pad is removed, the brake is located directly under it.  Remove the brake from the sander.
    • When the disc pad is removed, the brake is located directly under it. Remove the brake from the sander.

结论

To reassemble your device, follow these instructions in reverse order.

Shelby LeQuire

于2016年01月29日注册

588 信誉积分

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 7

过去的30天: 26

总计 658