简介

In this guide you will learn to remove the top button assembly, which can be replaced if damaged or filled with debris.

配件

无需配件。

Remove wrist strap and battery.
  • Remove wrist strap and battery.

添加评论

Remove 2 screws from each side of the camera (4 total, 0.102 in).
  • Remove 2 screws from each side of the camera (4 total, 0.102 in).

  • Remove 2 screws from the bottom on the camera (0.138 in).

  • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

添加评论

  • Gently pull off the front cover.

  • The plate on the side should come off.

  • Gently pull off the back cover.

添加评论

  • The cases should now be removed.

This can be a bit tricky when reassembling. All of the little tabs around the edge need to snap into their proper places, and there are three cover pieces to manage. Plus, you need to make sure that the camera/video/playback switch is properly engaged with its slider on the circuit board, otherwise you'll need to raise the back panel and reposition everything again.

Craig Bonsignore - 回复

oh yes , i agree lol

elbala80 -

  • Use the spudger to disconnect the black tab.

添加评论

  • Gently pull off the shutter button assembly.

添加评论

  • Use the tweezers to disconnect the microphone cable.

添加评论

  • The shutter button assembly should now be removed.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Wyatt Chan

于2011年01月05日注册

235 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-32, Regan Winter 2011 Cal Poly, Team 3-32, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G32

3 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,953