跳转到主内容

简介

Removing the memory card before performing any maintenance ensures that the memory card will not become damaged and loss of data is avoided.

工具

配件

没有特定配件。

  1. Place the camera on its side with the soft touch grip facing up and the top of the camera facing right.
    • Place the camera on its side with the soft touch grip facing up and the top of the camera facing right.

  2. Slide the memory card door in the direction of the arrow engraved on the camera.
    • Slide the memory card door in the direction of the arrow engraved on the camera.

    • Once the door has slid open to its full position, lift up on the door.

  3. With the door open, push down the small black plunger next to the CF slot. The CF card will disengage from the slot and be ejected far enough that you can grasp it between thumb and forefinger and remove it from the slot.
    • With the door open, push down the small black plunger next to the CF slot. The CF card will disengage from the slot and be ejected far enough that you can grasp it between thumb and forefinger and remove it from the slot.

    • The plunger will stay in its depressed position until a CF card is again inserted in the slot.

结论

To reassemble your device, follow these instructions in reverse order.

Nicholas Abate

于2015年08月28日注册

647 信誉积分

创作了5篇指南

团队

USF Tampa, Team 8-6, Eyestone Fall 2015 USF Tampa, Team 8-6, Eyestone Fall 2015 的会员

USFT-EYESTONE-F15S8G6

3 名成员

创作了18篇指南

My camara wont read memory card

mcbed215 - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 16

总计 2,558