我的工作台

快速访问设备的指南、配件和论坛

加入世界上最大的维修社区

Canon CanoScan N670U Glass Scanner Bed Replacement

Canon CanoScan N670U Glass Scanner Bed Replacement

Stephen Bui 和 2 其他贡献者

最后更新于 June 2, 2023

5 - 15 分钟

中等

简介

If you're encountering issues as a result from the scanner bed, this is where you will want to start.

To replace the glass scanner bed, you must:

Remove the two plastic bars that holds the scanner bed in place.
Carefully remove the glass scanner bed to add the replacement.

你所需要的

工具

Metal Spudger
Sale price $2.99

步骤 1 Canon CanoScan N670U Disassembly

Canon CanoScan N670U Glass Scanner Bed Replacement, Canon CanoScan N670U Disassembly: 步骤 1 中的图像 1，1

Open up your Canon CanoScan N670U to an upright position.

步骤 2

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 2 中的图像 1，1

Turn your device so that you're facing the long side of the Canon CanoScan N670U.
Locate the small crevice between the plastic components of the scanner bed and the scanner base.

步骤 3

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 3 中的图像 1，1

Carefully insert a metal spudger tool in the crevice and slowly cut through the adhesive between the plastic components.
You may cut small bits of the plastic as you're slicing the adhesive. Do not forcefully bend the plastic strip as you're cutting or it will snap.

步骤 4

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 4 中的图像 1，1

Once the adhesive strip is sliced through, the plastic bar that is attached should release. Set aside the plastic bar.

步骤 5

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 5 中的图像 1，1

Repeat steps 2-4 for the other side of the scanner.

步骤 6

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 6 中的图像 1，1

Use your hands or a metal spudger tool to push the plastic bar at the bottom of the glass scanner bed forward until you can't push it any farther.

步骤 7

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 7 中的图像 1，1

Insert the metal spudger tool underneath the glass scanner bed. The front of the scanner bed should be resting on top of the tool.

步骤 8

Canon CanoScan N670U Glass Scanner Bed Replacement: 步骤 8 中的图像 1，1

Slowly pull the glass scanner bed towards you and set the piece aside.

步骤 9 Glass Scanner Bed

Canon CanoScan N670U Glass Scanner Bed Replacement, Glass Scanner Bed: 步骤 9 中的图像 1，1

Replace your defective glass scanner bed with a new one.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Stephen Bui

于09/19/15注册

558 声望

创作了4篇指南

+ 7更多徽章

团队

USF Sarasota-Manatee, Team 1-1, Stewart Fall 2015 USF Sarasota-Manatee, Team 1-1, Stewart Fall 2015 的会员

USFSM-STEWART-F15S1G1

5 名成员

创作了20篇指南

0条评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 7

过去 30 天： 12

总计 501