加入维修社区 - 创建账户

简介

Use this guide to replace the speaker on your Beats Studio3 Wireless headphones.

The speaker allows users to receive audio through the headphone, and one can hear what they are playing through their phone or other devices. Failing audio is the most common indicator of faulty speakers. You may experience no sound coming from the speakers and/or poor quality, which indicates a replacement for the speaker.

你所需要的

1. 步骤 1 Ear Pad
  Find the separation between the headset and ear cushion.
  
  Use an opening tool to go underneath the separation site and split the pieces apart.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  You can also use your hands to remove it completely.
  
  Pulling it off can be challenging; make sure to apply enough pressure.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 3 Left Driver Assembly
  Remove seven 3.6 mm screws holding the speaker assembly in place using a Phillips #0 screwdriver.
  
  Make sure the screws aren't close to the speaker; due to it being a magnet, the screws could get stuck and damage the speaker.
  
  Open the speaker by pulling the top layer of the speaker.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 4
  With a heat gun or hair dryer, heat the glue that is sticking the wires down until the glue softens.
  
  Use a nylon spudger to remove the glue.
  
  Pull on the wire to remove it while also removing the blue rubber band.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 5
  Using a soldering iron to remove the cables on the charger port.
  
  For help with soldering, check out the How to Solder and Desolder Connections guide.
  
  Remove the two wires connected in the middle of the speaker using a soldering iron.
  
  Remove the speaker from the headset.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024