Asus MeMO Pad 7 ME170C Motherboard Replacement

Tatiana Schneider 和 11 其他贡献者

最后更新于 May 7, 2024

15分钟

中等

不正确的工具

需要更好的图片

详尽分析

简介

转到步骤 1

The motherboard is where all of the action takes place. It connects you to the internet and video streaming as well as running electricity to other parts of the device including the speakers and battery.

你所需要的

工具

步骤 1 Motherboard

Asus MeMO Pad 7 ME170C Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，3

Asus MeMO Pad 7 ME170C Motherboard Replacement, Motherboard: 步骤 1 中的图像 2，3

Asus MeMO Pad 7 ME170C Motherboard Replacement, Motherboard: 步骤 1 中的图像 3，3

Power off the device before disassembly.
Be gentle; excessive force can result in a damaged or cracked screen.
Gently pry a Jimmy all around the seam of the device until the back panel detaches.

编辑

步骤 2

Asus MeMO Pad 7 ME170C Motherboard Replacement: 步骤 2 中的图像 3，3

Use an iFixit opening tool to gently push the black bundle cable connector in a forward motion until it loosens without pushing down on the bundle cable connector.

编辑

步骤 3

Asus MeMO Pad 7 ME170C Motherboard Replacement: 步骤 3 中的图像 3，3

Use the plastic opening tool to pry around the edges of the battery.
The battery should be laying freely in its port.
Lift the battery out of its port.

编辑

步骤 4

Asus MeMO Pad 7 ME170C Motherboard Replacement: 步骤 4 中的图像 3，3

Use a plastic opening tool to slide the white cable connector completely out of the port.

编辑

步骤 5

Asus MeMO Pad 7 ME170C Motherboard Replacement: 步骤 5 中的图像 3，3

在这个步骤中使用的工具：

Tweezers

$4.99

添加到购物车

Flip up the beige clip to loosen the cable.
Use the wide nosed tweezers to pinch the blue tab attached to the ribbon cable.
Pull the blue tab gently in a lateral motion until it is completely out of its port.

编辑

步骤 6

Asus MeMO Pad 7 ME170C Motherboard Replacement: 步骤 6 中的图像 3，3

Use the wide nosed tweezers to gently pull out the orange ribbon inserted in the port on the motherboard.

编辑

步骤 7

Asus MeMO Pad 7 ME170C Motherboard Replacement: 步骤 7 中的图像 3，3

Use a plastic opening tool to push the white cable connector out of its port in a side to side motion.

编辑

步骤 8

Use the Phillips #000 screwdriver to unscrew the seven screws.
There should be two silver and five black screws.

编辑

步骤 9

Once the screws are removed, the speaker component will be loosely laying in the track.
Use the metal spudger tool to remove the speaker by gently lifting the edge of it.

编辑