简介

You will have to remove several screws and a couple of cables on the bottom of the ZG5 to remove or replace the wireless card.

配件

无需配件。

Turn the netbook upside down with the battery at the top, away from you.
  • Turn the netbook upside down with the battery at the top, away from you.

添加评论

Unlock the battery by sliding the switch located near the left hinge to the left "unlocked" position.
  • Unlock the battery by sliding the switch located near the left hinge to the left "unlocked" position.

添加评论

  • Slide the latch located on the opposite hinge from the lock while pushing the battery up.

添加评论

  • Gently loosen the two Phillips #0 screws in the small panel that covers the wireless card.

    • These screws are built into the panel and aren't meant to be completely removed.

添加评论

  • Lift up the panel and remove it from the case.

添加评论

  • Disconnect the two antenna cables from the left side of the wireless card.

添加评论

  • Remove the single 3.9 mm Phillips #1 screw from the bottom left of the wireless card.

添加评论

  • Gently lift up the left side of the wireless card and slide the card out of its socket.

mi lap NO tiene wireless card

gustavo cordova - 回复

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Doug Gallatin

于2010年10月05日注册

5,754 信誉积分

创作了10篇指南

团队

Cal Poly, Team 7-49, Amido Fall 2010 Cal Poly, Team 7-49, Amido Fall 2010 的会员

CPSU-AMIDO-F10S7G49

5 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 5

过去的30天: 45

总计 22,158