加入维修社区 - 创建账户

简介

Do you need to replace the joysticks on your 8BitDo Ultimate Wireless? If so, this guide will show you how to correctly and safely do so!

With that said, please make sure to check our Troubleshooting Guides first. Often times, there is no need to go as far as replacing the joysticks entirely.

Before beginning, turn off the controller and ensure it will not accidentally reconnect during the repair.

你所需要的

步骤 1 Case

8BitDo Ultimate Wireless Joystick Cover Replacement, Case: 步骤 1 中的图像 1，2

8BitDo Ultimate Wireless Joystick Cover Replacement, Case: 步骤 1 中的图像 2，2

Insert an opening pick into the seam between the left controller grip and main controller body.
Pry the grip off.
Repeat for the right grip.

翻译

询问修复机器人

步骤 2

Remove the six 8 mm T6 Torx screws securing the rear case to the front case.

翻译

询问修复机器人

步骤 3

8BitDo Ultimate Wireless Joystick Cover Replacement: 步骤 3 中的图像 3，3

Insert an opening tool into seam at the bottom of the device and carefully pry the front and back shells apart.
Set the halves next to each other with care not to strain the connected ribbon cables.

翻译

询问修复机器人

步骤 4

8BitDo Ultimate Wireless Joystick Cover Replacement: 步骤 4 中的图像 3，3

The ribbon cable is secured with a locking tab connector.
Use tweezers to unlock the locking tab on the ribbon cable connector, then gently disconnect the ribbon cable.

翻译

询问修复机器人

步骤 5 Joystick Covers

8BitDo Ultimate Wireless Joystick Cover Replacement, Joystick Covers: 步骤 5 中的图像 1，1

Grip each joystick cap firmly and pull straight up to remove them.

翻译

询问修复机器人

结论

To reassemble your device, follow the above steps in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.