跳转到主内容

第四代iPhone。维修过程直观易懂,但前置玻璃和LCD面板无法分开,只能作为同一零件更换。GSM版本, 8, 16, or 32 GB 容量 / 型号 A1332 / 黑色或白色

3274 个问题 查看全部

How do I recover my screen after I laundered my I-phone?

Four days ago, my new I-phone went through the laundry for 15 minutes. The battery was flat, and the phone was off. I immediately removed the sim card and battery and ran a hair dryer at low heat on it for fifteen minutes, then left it in rice. I alternated hair dryer and rice for three days, then tried the phone.

The battery has fully recharged. The sounds I hear from the phone suggest that it is operating, but nothing is visble at all on the screen.

Is there anything I can do short of replacing the phone?

P.S. I am in France where I have a language handicap. Thanks for your help!

回答此问题 我也有这个问题

这是一个好问题吗?

按维修分数 0

评论:

Thanks, "I-fix-it", I will try this tonight.

添加一条评论

Macbook 电池维修套装

起价 $69.99

Buy Now

Macbook 电池维修套装

起价 $69.99

Buy Now

2个回答

最有帮助的答案

Dan Miller, "the first thing I would suggest is that you clean your phone. The rice is a great first step, but it will not fix your phone, nor will it prevent corrosion damage which might occur later on. Use this guide to clean your phone. It was written for a 3G but it will still pertain to your phone as well. The repair guides for your phone are here. After that you want to check this "There is really no a surefire way to say which part is the one that gives you the problem. I would recommend that you start it systematically. Start with the easiest part, and that is the display, replace that. If your screen is absolutely black, with no faint images, I am certain that this is your problem. If it would have faint images, I would recommend to take a look at the backlight IC and coil on the logic board. That repair is a bit more difficult due to the fact that those are SMD components." It's kind of (in a very simplistic description) the LCD is your light bulb and the backlight IC and coil are your light switch. Also check this iPhone 4 got wet, but works, screen dark and multiple more on here. Try the display first. Hope this helps, good luck."

这个答案有帮助吗?

按维修分数 1
添加一条评论

Probably your screen died. Replacing the display assembly may solve your problem.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

Dan Miller 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 487