Schematics and pictures of circuit board. Very often the wire feeder stops working because of died relay. You can replace the defective one with a more durable 8A relay.
Stef_AN @stefan27396
声誉积分: 159
1
发帖于: 2024年6月3日
Schweissgeraet 1
这是一个好问题吗?
3条评论:
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
由 jayeff 完成的 2024年6月3日
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
由 Stef_AN 完成的 2024年6月3日
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
过去 24 小时: 0
过去 7 天: 0
过去 30 天: 1
总计 19
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
由 jayeff 完成的
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
由 Stef_AN 完成的
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
由 jayeff 完成的